So my really small coolant leak turned into leaving a puddle under the radiator. I parked the car for the week and will be driving my Mazda until I can get around to finishing up the repairs. The list of retairs: -replace the radiator -turbo drain line seals -tranny to angle gear seals -passenger si...

The dash light problem is most likely the headlight switch if it isn't just a connection problem.

Looks good.

I started on my parts install project. 20180414_100533.jpg I didn't get as far as I hoped. One of the end links had to be cut off and took way longer to do than it should have. I also had to make a run to get a torx socket set to remove the hub bolts. The driver's side hub was making noise but I was...

That shouldn't be happening that quick. Tires are supposed to last 7 years.

speedjunkie wrote:Oh that's right, now I remember. So you haven't swapped the flanges yet? It's almost summer, better get on it! lol

I need to get someone to help me weld it. We replaced the front flange but I still need to do the rear flange.

You could always get the standard door and the conversion kit separately.

I ordered a Snabb Reverse Intercooler Piping kit in black with big bore throttle body tube and the Snabb Upper Idle Air Hose in black.
http://www.snabb.us/93-98-Reverse-Inter ... p_287.html
http://www.snabb.us/Upper-Idle-Air-Hose_p_103.html

I haven't tried that gasket but I did install solid copper gaskets and that didn't help either. One my pipe it isn't just the center popping out, it is completely warped and deformed. They did say if I sent it back to them, they would fix it. It was cheaper for me to get the new upgraded (thicker an...

I have the Bonez setup on my GSLSE. Overall I like the setup but I wasn't 100% satisfied with it. I have there stock bolt-in setup for my car. The flanges were warped and the bend wasn't right for the car. I still need to replace one of the flanges because I have a massive exhaust leak. I burn throu...

My parts came in early, I got them on Saturday. Now I need to find the time to install them. Front Wheel Hub Assemblies - FAG 274378 Sway Bar Link - Meyle HD 31212730 Transfer Case Input Shaft Seal - Genuine Volvo 30735126 Fuel Pump Tank Seal - Genuine Volvo 9447179 Drive Axle Seal - Genuine Volvo 9...

You can buy the doors setup that way.

I just made a big purchase for the car totaling $460. I'm going to try and get most of the maintenance done on the car in the coming weeks. I did economy shipping so it's going to take a week and a half to get here. Friday's plans are to finish the interior swap. I also need to get stuff together to...

Nice, that looks really good. Hopefully you will want to keep it now.