Hey Guys,
I just bought a 2007 Mazdaspeed6 w/ 35,000 miles. After I got to the dealer, I found out that the previous owner had done some aftermarket mods (cold air intake, atmospheric BOV, short-shifter). Evidence that they didn't know what they were doing: he/she also put on tires too big for the rims which caused them rub to the point where they were about to burst.
My concern is that they made mods with or without a proper tune and I'd like to find a good shop/tuner in the area. I live in Boulder now, so anywhere in a 50 mile radius would be fine.
Who would you go to to get this checked our right without costing an arm and a leg?
P.S. Yes, I'd be interested in auto-x in the near future too.
New to Mazda and new to the area. Who's Good for Repairs?
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
welcome
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
Cool. Welcome. Neat car!
Fpr stock cars and stock repairs, I totally endorse:
Coyote Motors 303-443-3011
North Boulder, on Broadway near Violet.
However, that is not the place for tuning or hot rodded/modified stuff. Great place for regular work and maintenance and repairs, but not a race or tuning shop.
Sorry, but not sure where to suggest locally for tuning. You'll need a dyno, right?
Fpr stock cars and stock repairs, I totally endorse:
Coyote Motors 303-443-3011
North Boulder, on Broadway near Violet.
However, that is not the place for tuning or hot rodded/modified stuff. Great place for regular work and maintenance and repairs, but not a race or tuning shop.
Sorry, but not sure where to suggest locally for tuning. You'll need a dyno, right?
Thanks Guys.
I'm not really looking to get it tuned off the bat, I just want to make sure that whatever the previous owner did isn't going to ruin my day. I heard that MS6s are very temperamental with a bad tune.
Long story short, because of the tire thing, it's still in Oklahoma City. My friend is driving it up here tomorrow. I can't wait to get rid of the BOV. I'm planning on getting this: http://www.streetunit.com/ProductDetails.asp?ProductCode=TS-0997-1009
I'm not really looking to get it tuned off the bat, I just want to make sure that whatever the previous owner did isn't going to ruin my day. I heard that MS6s are very temperamental with a bad tune.
Mortose wrote:best bang for your buck: mazdaspeedforums.org, and find one of the E-tuners.
Also, get rid of the BOV, and get an AccessPort.
I'm supprised you haven't gotten a CEL with the BOV.
again, hit up msf.org. they are THE resource for Speed vehicles.
Long story short, because of the tire thing, it's still in Oklahoma City. My friend is driving it up here tomorrow. I can't wait to get rid of the BOV. I'm planning on getting this: http://www.streetunit.com/ProductDetails.asp?ProductCode=TS-0997-1009
The Synapse is the best valve I have ever used, although the HKS and Turbosmart stuff is good as well. Not as much a fan of the Tial stuff, never really was that impressed.
No need for a PM, info is at GRID-1.net if you try and open on some mobile phoes you probably want to use grid1motorsport.com if you get an error message using grid-1.net
No need for a PM, info is at GRID-1.net if you try and open on some mobile phoes you probably want to use grid1motorsport.com if you get an error message using grid-1.net
1986 Turbo FC race car, S6 13b, GOOPY Apex seals etc, GT35R, AEM EMS, lots more good stuff
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
RX8 World Chalenge Touring Car #7
RX8 World Challenge Touring Car #8
D Walker wrote:The Synapse is the best valve I have ever used, although the HKS and Turbosmart stuff is good as well. Not as much a fan of the Tial stuff, never really was that impressed.
No need for a PM, info is at GRID-1.net if you try and open on some mobile phoes you probably want to use grid1motorsport.com if you get an error message using grid-1.net
Thanks! FYI, your home page returns a 404, but all of your sub pages work.
I don't think that the intake and bpv would have a negative impact on a car engine's performance, integrity or longevity.
If you have bought this car, then I would recommend an AP (accessport) and get it professionally tuned. This is a great first mod for the speed.
Good luck and happy tuning,
Paul
Edit: p.s. I also endorse the syanpse bpv. I don't have one now, but plan on upgrading to one soon from my HKS.
If you have bought this car, then I would recommend an AP (accessport) and get it professionally tuned. This is a great first mod for the speed.
Good luck and happy tuning,
Paul
Edit: p.s. I also endorse the syanpse bpv. I don't have one now, but plan on upgrading to one soon from my HKS.
"Littering, and?..."


So here's an update. Long story short, I had to leave it in Oklahoma City after I bought it and my friend drove it back for me yesterday.
I take a look under the hood to see what kind of BOV they put on there, and it turns out, instead of /buying/ a noisy BOV, they simply removed the hose from the back of the stock one... The only good news from that is that all I have to do is buy some more hose and it should be back where it belongs.
I take a look under the hood to see what kind of BOV they put on there, and it turns out, instead of /buying/ a noisy BOV, they simply removed the hose from the back of the stock one... The only good news from that is that all I have to do is buy some more hose and it should be back where it belongs.
Radiator hose works great for that. I had to rig up a custom recirc hose when I bought my Synapse because I had to angle it weird to get it to not rub on the hood. Bought a section of radiator hose from AutoZone and it worked great.
As for the tune, it's unlikely that it still has any sort of tune on it. As far as I know, all the tuning methods require you to "marry" the tuning device with the car. Once a tune is loaded, the device is locked to the car and the original owner wouldn't be able to sell the tuning device without "unmarrying" and thus unloading the tune.
Chances are though if they were too cheap to even spend the $150 on a Forge or Turbosmart BPV, they probably didn't drop $400-500 on an AP to tune the thing.
As for the tune, it's unlikely that it still has any sort of tune on it. As far as I know, all the tuning methods require you to "marry" the tuning device with the car. Once a tune is loaded, the device is locked to the car and the original owner wouldn't be able to sell the tuning device without "unmarrying" and thus unloading the tune.
Chances are though if they were too cheap to even spend the $150 on a Forge or Turbosmart BPV, they probably didn't drop $400-500 on an AP to tune the thing.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
erod550 wrote:Radiator hose works great for that. I had to rig up a custom recirc hose when I bought my Synapse because I had to angle it weird to get it to not rub on the hood. Bought a section of radiator hose from AutoZone and it worked great.
Picked up the hose today. Going to try and install it. Kind of worried about it kinking with the angle...
erod550 wrote:As for the tune, it's unlikely that it still has any sort of tune on it. As far as I know, all the tuning methods require you to "marry" the tuning device with the car. Once a tune is loaded, the device is locked to the car and the original owner wouldn't be able to sell the tuning device without "unmarrying" and thus unloading the tune.
Chances are though if they were too cheap to even spend the $150 on a Forge or Turbosmart BPV, they probably didn't drop $400-500 on an AP to tune the thing.
While I agree with your logic, the owner did put in an AEM cold air intake, a short throw shifter, and some other do-dad that I have yet to identify (something on the vaccum line to the turbo that says "more boost" or something like that)
Know of anyone who wants to sell a AccessPort for cheap?

Who is online
Users browsing this forum: Bing [Bot] and 168 guests

