Anyone hungry for some rice?
- speedjunkie
- Senior Member
- Posts: 5298
- Joined: Wed Jan 02, 2008 9:14
- Location: Colorado Springs
- Contact:
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
I saw an acura with vinyl CF on the entire front all the way to half way down the doors. Also the wheels were covered in it. It wasn't even an attempt at a good job.
Shadow was that you?
Shadow was that you?
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
How ricey is it, if I put a carbon fiber hood on my MS6?
Thinking of doing color-matched paint on the outer contours of the hood line, and leaving a narrowing effect with the exposed CF. It will be similar to the picture below, but w/out the high contract of white/CF, since my car is Black Cherry Mica.
Thinking of doing color-matched paint on the outer contours of the hood line, and leaving a narrowing effect with the exposed CF. It will be similar to the picture below, but w/out the high contract of white/CF, since my car is Black Cherry Mica.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
I probably would normally agree with you, and just say to leave the hood totally exposed CF, but..... The problem is that the person I procured this from, already did some paint accents to match her car. So unless I want to leave her accents (black with silver), I'll need to do my paint over it, or somehow have that current paint "stripped" to show the CF again.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
~Barn~ wrote:I probably would normally agree with you, and just say to leave the hood totally exposed CF, but..... The problem is that the person I procured this from, already did some paint accents to match her car. So unless I want to leave her accents (black with silver), I'll need to do my paint over it, or somehow have that current paint "stripped" to show the CF again.
Why not paint the entire thing? I imagine you picked it up because it is lighter? Also, I like the two tone look. Seems to follow lines nicely. Since you don't have as much contrast, I think it would look good. But, I may not be the best person to ask...I am thoroughly bored with all of the JDM cars. They all end up the same.
_Chris, it wasn't me. If it were an S2000, then it probably would have been?:rolleyes::D
I think the two-tone would look good too, considering my stock color. Maybe I'll just have to take the hood to a body shop and see what they say about gently being able to removing the paint that is on there, currently. I would have to think there's some sort of solvant that can be used.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
I think just a straight up CF hood would look good against the BCM. It's a dark color and you I think it'd be a waste to vinyl over the edges.
Edit - Read the rest of the other posts. Didn't realize it was already painted. Either Match it with vinyl to BCM (The Cheaper route) or talk to a shop about sanding the paint off and buffing the CF or re-painting it to BCM. ( The expensive route)
Edit - Read the rest of the other posts. Didn't realize it was already painted. Either Match it with vinyl to BCM (The Cheaper route) or talk to a shop about sanding the paint off and buffing the CF or re-painting it to BCM. ( The expensive route)
Not sure how the vinyl overlay stuff works. For all I know, the "paint" that I'm looking at now, is vinyl.
Called a body shop today and while they told me that (assuming it's paint) they could remove it, they said that returning what is underneath to the matching sheen of the currently exposed CF, might be hard. Obviously if it was painted once, the hood was prepped for it, and that is their concern. I think I'm leaning more and more to just having all the currently painted area, reshot BCM and calling it a day.
Called a body shop today and while they told me that (assuming it's paint) they could remove it, they said that returning what is underneath to the matching sheen of the currently exposed CF, might be hard. Obviously if it was painted once, the hood was prepped for it, and that is their concern. I think I'm leaning more and more to just having all the currently painted area, reshot BCM and calling it a day.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
Haven't actually visited them yet so they can see it. Hoping to do it this weekend.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
Droppped the hood off this morning with Body Beautiful near my house. They confirmed that it was paint not vinyl and I'm looking at $325 (4 hours labor + paint + disposal/shop-fees) for them to redo it. I'm just doing BCM over what is there now.
~Brandon~
720.935.6438
720.935.6438
(\__/)
(='.'=)
(")_(")
This is Bunny. Bunny has the following mods: BNR Supercars GT28RS TC - Mazdaspeed CAI - ACT Streetlite CK - Vibrant TIP - Extreme Turbo Systems TMIC - SLS Performance TP - Magnaflow CBE - James Barone Racing SSP & HSK - Cobb AP - Xcarlink iPod integrator - VG Sharkfin - RX-8 Wheels - Fiber Images CF Hood w/BCM accents
Who is online
Users browsing this forum: No registered users and 127 guests