Turbo rebuild shops?

Talk about your Rotaries!
Post Reply
2slw4u
Member
Posts: 32
Joined: Mon Aug 27, 2012 9:14
Location: Westminster, CO

Turbo rebuild shops?

Postby 2slw4u » Sat Sep 01, 2012 9:14

Hey everyone I'm currently in kansas, driving my turbo 2 back home, but on my road trip home I believe I blew my turbo because its very loud as far as exhaust and also my boost will not get higher than about 3-4psi, it was getting to about 9psi when I first picked it up, it is the sstock size turbo for my 89 Rx7 t2, but my question is, where is a good turbo rebuild shop in the Denver area since I live in Westminster,let me know thanks guys.
[SIZE="2"]1989 Mazda RX7 T2[/SIZE]
[SIZE="2"]1992 Jeep Cherokee Lifted 5" on 32's DD[/SIZE]
Top
User avatar
ecam8000
Posts: 478
Joined: Mon Jan 10, 2011 9:14
Location: Littleton, CO

Postby ecam8000 » Sat Sep 01, 2012 9:14

Cental Motive Power, about 66th and Broadway.
Eric
99 Miata, 45 STR SCCA goto: http://www.rmsolo.org/

2 Fords 29 & 2000.

99 BMW 328i

THANKS! To all who serve.
Top
2slw4u
Member
Posts: 32
Joined: Mon Aug 27, 2012 9:14
Location: Westminster, CO

Postby 2slw4u » Sat Sep 01, 2012 9:14

ecam8000 wrote:Cental Motive Power, about 66th and Broadway.


Just curious, do you know roughly how much a rebuild is?
[SIZE="2"]1989 Mazda RX7 T2[/SIZE]

[SIZE="2"]1992 Jeep Cherokee Lifted 5" on 32's DD[/SIZE]
Top
User avatar
chickenwafer
Posts: 2515
Joined: Wed Mar 11, 2009 9:14
Location: Greeley

Postby chickenwafer » Sat Sep 01, 2012 9:14

I would guess you have a boost leak over a blown turbo. A blown turbo will usually have a very difficult time making any boost. Do you hear any hissing or wooshing noises? Either that or an exhaust leak as you mentioned you hear more exhaust. A pre-turbo exhaust leak will severely effect turbo spool time and limit boost, as if the wastegate is stuck open.
:eek:
Top
2slw4u
Member
Posts: 32
Joined: Mon Aug 27, 2012 9:14
Location: Westminster, CO

Postby 2slw4u » Sat Sep 01, 2012 9:14

Oh ok, well ya I talked to some friends and they asked if I was smoking or anything like that, ans I have no smoke or anything as far as that goes. They said the same thing you just said, I will have to wait until tomorrow or so to figure it out, we are about two hours away from Denver. But I sure hope its just a bad exhaust leak, it sounds like a loud tracktor
[SIZE="2"]1989 Mazda RX7 T2[/SIZE]

[SIZE="2"]1992 Jeep Cherokee Lifted 5" on 32's DD[/SIZE]
Top
User avatar
ecam8000
Posts: 478
Joined: Mon Jan 10, 2011 9:14
Location: Littleton, CO

Postby ecam8000 » Sun Sep 02, 2012 9:14

chickenwafer wrote:I would guess you have a boost leak over a blown turbo. A blown turbo will usually have a very difficult time making any boost. Do you hear any hissing or wooshing noises? Either that or an exhaust leak as you mentioned you hear more exhaust. A pre-turbo exhaust leak will severely effect turbo spool time and limit boost, as if the wastegate is stuck open.


I agree. Most turbo "failures" are catastrophic. I'd also bet it is a leak somewhere.
Eric

99 Miata, 45 STR SCCA goto: http://www.rmsolo.org/



2 Fords 29 & 2000.



99 BMW 328i



THANKS! To all who serve.
Top
2slw4u
Member
Posts: 32
Joined: Mon Aug 27, 2012 9:14
Location: Westminster, CO

Postby 2slw4u » Sun Sep 02, 2012 9:14

So today at work we got the car up on the lift, and the gasket that goes from manifold to turbo is blown, so I need to get a new gasket, any one who has a T2 have any advise to get the new gasket in as painlessly as possible? It seems I will need to go from under neath the car to get it in. But I may be wrong. Thanks for all your guys' help
[SIZE="2"]1989 Mazda RX7 T2[/SIZE]

[SIZE="2"]1992 Jeep Cherokee Lifted 5" on 32's DD[/SIZE]
Top
Post Reply

Return to “Rotary Vehicle”

Who is online

Users browsing this forum: No registered users and 53 guests