Car's gone, dude didn't want the rear seat setup, so it's here for sale.
Black rear seats, nice shape. Seat bottom has a seam split that can probably be fixed pretty easy.
$600 picked up for everything. Seat back and bottom with brackets, rear panels (you need speaker covers, but I have a set for sale) rear hatch plastics, rear seatbelts.
You'll need a couple body clips from your bins, maybe a nut/bolt or two and a couple hours to do the install.
I've never seen a US car with the complete setup, most are missing parts. This is complete.
Front cloth seats. US Drivers side is in very good to like new condition. The seat rails have been modified to slide all the way back like the US cars.
US Passenger seat has some wear and one very minor hole that's hidden near a seam. The vinyl backing on the passenger seat has 2 minor spots at the stitching where it's separating. The passenger side seatbelt strap is also broken at the base. It works fine when it's strapped up.
$300 picked up
Car sold, parts for sale, twins, intercooler, JDM rear seats too
Rehabbed stock turbos $325
These turbos were sold to me by Chickenwafer, I never even picked em up. I paid a lot more than this for em.
This is his ad:
First is a set of *mint* factory twins I converted to non-sequential. I bought these used with a reported 23,000 miles on them and was told they boosted perfectly and did not smoke. Extremely minimal shaft play.
Upon receiving the twins I completely disassembled them, inspected all parts, thoroughly cleaned each and every part, converted to non-sequential, and painted all parts with a special high-temp enamel that cures in an oven in a 3 stage process. The finish is chemical, liquid, and oil resistant and very durable. The results speak for themselves:
Stock FD rad out of a low mileage 94. Didn't leak, not many bent fins. Car ran cool and had very regular coolant flushes.
$100 picked up
Stock intercooler with both hoses (only one pictured)
$40 picked up
Pettit cool charge intercooler. Best description I can give, rough. Lots of bent fins, and a spot where it rubbed on something and split about 1 mm.
I took it to a radiator shop and was quoted $125 to refurbish it and make it like new, that included fixing the leak. If you're willing to do the work, you'll end up with a really nice SMIC really cheap.
$100 picked up
R1/base speaker grills. All the tabs are intact. Perfect shape.
$70 picked up.
OEM turn signal housings. Good shape, maybe hit em with a light plastic polish before you install em. $20
2 dual gauge pods. One's an autometer one's a Proparts. Both are like new, I don't think they were ever used.
$20 a piece.
Upper steering column plastic piece. Only the top half. Good shape.
$20
These turbos were sold to me by Chickenwafer, I never even picked em up. I paid a lot more than this for em.
This is his ad:
First is a set of *mint* factory twins I converted to non-sequential. I bought these used with a reported 23,000 miles on them and was told they boosted perfectly and did not smoke. Extremely minimal shaft play.
Upon receiving the twins I completely disassembled them, inspected all parts, thoroughly cleaned each and every part, converted to non-sequential, and painted all parts with a special high-temp enamel that cures in an oven in a 3 stage process. The finish is chemical, liquid, and oil resistant and very durable. The results speak for themselves:
Stock FD rad out of a low mileage 94. Didn't leak, not many bent fins. Car ran cool and had very regular coolant flushes.
$100 picked up
Stock intercooler with both hoses (only one pictured)
$40 picked up
Pettit cool charge intercooler. Best description I can give, rough. Lots of bent fins, and a spot where it rubbed on something and split about 1 mm.
I took it to a radiator shop and was quoted $125 to refurbish it and make it like new, that included fixing the leak. If you're willing to do the work, you'll end up with a really nice SMIC really cheap.
$100 picked up
R1/base speaker grills. All the tabs are intact. Perfect shape.
$70 picked up.
OEM turn signal housings. Good shape, maybe hit em with a light plastic polish before you install em. $20
2 dual gauge pods. One's an autometer one's a Proparts. Both are like new, I don't think they were ever used.
$20 a piece.
Upper steering column plastic piece. Only the top half. Good shape.
$20
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
Hey im looking for the middle plastic piece for the rear hatch how much are you selling it for just that piece,mine is broken. I need it ASAP
Edit: Also the 2 plastic pieces that cover the "Koni firm knobs" in the rear hatch also.
Edit: Also the 2 plastic pieces that cover the "Koni firm knobs" in the rear hatch also.
[font="Comic Sans MS"][SIZE="3"][color="Red"]My reaction when I got my first FD[/color][/SIZE][/font]:lol:
Rx7boy719 wrote:Hey im looking for the middle plastic piece for the rear hatch how much are you selling it for just that piece,mine is broken. I need it ASAP
Edit: Also the 2 plastic pieces that cover the "Koni firm knobs" in the rear hatch also.
Don't have the middle piece, if you're talking about the one that allows you to get to the taillights and spare tire.
I have the plastic covers, but I'm waiting to see if anybody needs the whole plastics.
- speedjunkie
- Senior Member
- Posts: 5289
- Joined: Wed Jan 02, 2008 9:14
- Location: Colorado Springs
- Contact:
Who is online
Users browsing this forum: Google [Bot] and 125 guests