Emissions

Talk about your Rotaries!
User avatar
Skye's7
Member
Posts: 40
Joined: Sat Jan 21, 2012 9:14
Location: Thornton

Emissions

Postby Skye's7 » Tue May 06, 2014 9:14

Alright guys, I've never owned a 13b rew before, so this will be a new experience. My red s4 has a 13b Rew swap, jdm, with a little porting done to the runners. The previous owner ran premix and so I shall continue to do so, knowing it's probly not good for emissions. It's catless at the moment, but I bought a cat hoping it'll last long enough to get it through. Luckily I haven't had the cat installed so I'm not exactly if it'll work. It's tuned on power by Fc. Everything is stock on the motor execpt for the light porting and no cat. Oil pump is slightly working according to th previous owner so he premixed. From researching a bit, I know I'm going to be running the engine till it's fully up to temp, and for about 30 mins so everything is up to temp. Anyone got anybody on the inside? Ahha I don't want my brappag to go away...

User avatar
Skye's7
Member
Posts: 40
Joined: Sat Jan 21, 2012 9:14
Location: Thornton

Postby Skye's7 » Tue May 06, 2014 9:14

Anyone know anyone inside and anyone have any tips? Ahha forgot to add at the end


Return to “Rotary Vehicle”

Who is online

Users browsing this forum: No registered users and 119 guests