Aftermarket parts acquisition
- Sixburgher
- Posts: 58
- Joined: Thu Jul 02, 2009 9:14
- Location: Cheyenne, WY
- Contact:
Aftermarket parts acquisition
Does anyone know somewhere within CO or WY borders that sell after market parts? I really want to get a Synapse BOV this week. Any and all info is helpful. Thanks!
http://www.synapseengineering.com/
Check their distributor link. I found 3 or so CO listings but all of their webpage links seem to be dead.
Check their distributor link. I found 3 or so CO listings but all of their webpage links seem to be dead.
[SIGPIC][/SIGPIC]
1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4
mods- 30" BFGs, AAL + TT = 1.5" lift, more to come
1997 Explorer XLT - 4.0 SOHC V6 Controltrac 4x4
mods- 30" BFGs, AAL + TT = 1.5" lift, more to come
-
- Posts: 1330
- Joined: Fri Sep 21, 2007 9:14
- Location: Denver
- Contact:
I got mine from SCR in Loveland. If you have someone install it for you make sure you get the boost source from a tap in the hot pipe coupler comming from the intercooler. The synapse plays nicer with an unregulated boost source rather than tapping off the regulated waste gate line. It may not cause problems now, but for future modding it will work better with the boost tapped from the hot pipe coupler.
2006 SPEED6 Liquid Platinum Sport w/ Nav
Mods Completed - VG Sharkfin, 3M Clear Bra, SU Motor Mount, SU Test Pipe, 35% tint, VEI Digital Boost Gauge, Custom Defrost Vent Pod, PG Exhaust Manifold, CPE Turbo Inlet Pipe, CPE FMIC, Hacked Mazdaspeed CAI into SRI, Synapse BOV, Cobb Accessport EMS Tuner, CPE Dual 3" Catback Exhaust
Mods Needed - Catted Downpipe and finally a tune.
Mods Completed - VG Sharkfin, 3M Clear Bra, SU Motor Mount, SU Test Pipe, 35% tint, VEI Digital Boost Gauge, Custom Defrost Vent Pod, PG Exhaust Manifold, CPE Turbo Inlet Pipe, CPE FMIC, Hacked Mazdaspeed CAI into SRI, Synapse BOV, Cobb Accessport EMS Tuner, CPE Dual 3" Catback Exhaust
Mods Needed - Catted Downpipe and finally a tune.
Fly boy wrote:We have a local up here that is getting a shop together.
Joey? I think, hothatch93 is his screen name.
yah, im getting my exhaust installed by him.
and DONT go to PFI in fort collins. too many people i know have had bad experiences with them...they play nice with people they know, but not the general public.
- Sixburgher
- Posts: 58
- Joined: Thu Jul 02, 2009 9:14
- Location: Cheyenne, WY
- Contact:
Well, I went to SCR Performance today and I gotta say, those dudes got their act together. Not only was it very fairly priced, but he walked me through everything I had to do to install the Synapse BOV. Went home and an hour later, I was swooshin all over the place I will definitely be a repeat customer to that place.
-
- Posts: 1330
- Joined: Fri Sep 21, 2007 9:14
- Location: Denver
- Contact:
Sixburgher wrote:Well, I went to SCR Performance today and I gotta say, those dudes got their act together. Not only was it very fairly priced, but he walked me through everything I had to do to install the Synapse BOV. Went home and an hour later, I was swooshin all over the place I will definitely be a repeat customer to that place.
Sweet, glad you found what you were looking for...got any pics of your new toy?
2013 FRS
- Sixburgher
- Posts: 58
- Joined: Thu Jul 02, 2009 9:14
- Location: Cheyenne, WY
- Contact:
- Sixburgher
- Posts: 58
- Joined: Thu Jul 02, 2009 9:14
- Location: Cheyenne, WY
- Contact:
Cesaros wrote:yah, im getting my exhaust installed by him.
and DONT go to PFI in fort collins. too many people i know have had bad experiences with them...they play nice with people they know, but not the general public.
We've had a lot of people from our SRT club go there with really good luck. What type of issues are all of your friends having?
Return to “Engine and Drivetrain”
Who is online
Users browsing this forum: No registered users and 39 guests