What is up guys,
The time has come to go turbo-back exhaust ...I'm thinking corksport because the sound is compelling and rich.
[ame="http://www.youtube.com/watch?v=FSK6GjNVz8U"]MazdaSpeed 3 CorkSport Turbo-back Cat-less Exhaust - YouTube[/ame]
So with this, I'm going to require fuel pump internals to be upgraded so I won't go ZZB (zoom zoom boom).
I'm searching on the other forum, but I'm going to require some help. What kit to buy as well as installation help. Or I may have to take it to a shop as I've never done this project before.
Recommendations/thoughts welcome!
HPFP (High Pressure Fuel Pump)
HPFP (High Pressure Fuel Pump)
"Littering, and?..."
- KILLER_VIZ
- Senior Member
- Posts: 263
- Joined: Sun Oct 23, 2011 9:14
- Location: Thornton
autotech internals from http://www.edgeautosport.com they are a local company down in Englewood and they have them in stock. Also, do you have a Cobb Access Port?
KILLER_VIZ wrote:autotech internals from http://www.edgeautosport.com they are a local company down in Englewood and they have them in stock. Also, do you have a Cobb Access Port?
Thank you sir. I am running the hypertech. It's been good with all of my mods (basic bolt-ons) so far, and I remember reading that it should be good with a downpipe.
Do you know if edge could help with the install as well?
"Littering, and?..."
- KILLER_VIZ
- Senior Member
- Posts: 263
- Joined: Sun Oct 23, 2011 9:14
- Location: Thornton
Number2 wrote:Thank you sir. I am running the hypertech. It's been good with all of my mods (basic bolt-ons) so far, and I remember reading that it should be good with a downpipe.
Do you know if edge could help with the install as well?
I wouldnt trust it with a down pipe IMO. Spring for the AP it will be worth it all around.
- KILLER_VIZ
- Senior Member
- Posts: 263
- Joined: Sun Oct 23, 2011 9:14
- Location: Thornton
- KILLER_VIZ
- Senior Member
- Posts: 263
- Joined: Sun Oct 23, 2011 9:14
- Location: Thornton
8k? Are you going from bone stock to built motor and big turbo and full suspension? 8k should buy just about every mod you can do to an MS3 lol.
I wish I had 8k to spend on my car right now. Could supercharge it and finish the suspension and have a 600hp beast. :\
I wish I had 8k to spend on my car right now. Could supercharge it and finish the suspension and have a 600hp beast. :\
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors
Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4
- KILLER_VIZ
- Senior Member
- Posts: 263
- Joined: Sun Oct 23, 2011 9:14
- Location: Thornton
Return to “Engine and Drivetrain”
Who is online
Users browsing this forum: No registered users and 10 guests