HPFP (High Pressure Fuel Pump)

[Number2]

I'm going with the Autotech HPFP internal upgrade from Edge Motorsports. Looking at a late March install.
-Fuel Pump upgrade
-Corksport Turboback Exhaust.

Anyone else looking to do an 'Install' day in late march?

[pyrrhus17]

Hey number 2 can could you do a Diy with pic's (any chance)

[Number2]

Hey number 2 can could you do a Diy with pic's (any chance)

Hi Pyrrhus,

I had the fuel pump internal upgrade done by a professional, as I didn't trust myself to do this upgrade. I have no pics along the way, but I will say that it is a fairly straight-forward upgrade, and that no engine components need to be removed besides the intercooler shroud. Also to note, you will need a good vice that will hold the fuel pump in place while the new one is installed.

It should be about one hour's work if you decide to take it to a shop.

[Mortose]

its really easy, all you need is a torque wrench, an inverted E8 socket, and a Deep 18mm Socket. there are a couple vids on youtube on how to do it. i went SUPER slow doing mine and it only took about an hour.

[Number2]

Also, there's a great tutorial with pics on the other forums.

[Andyscums]

its really easy, all you need is a torque wrench, an inverted E8 socket, and a Deep 18mm Socket. there are a couple vids on youtube on how to do it. i went SUPER slow doing mine and it only took about an hour.

If I kicked you a couple bucks would you walk me threw mine and help me with them if I drove down to the springs? I contacted edge but the wait is almost 3 weeks and I want to do my dp and stuff but am waiting on these before I do

[Mortose]

its all good man, just come down and we can knock it out. no worries.

[_AlexTM]

its all good man, just come down and we can knock it out. no worries.

I want hangs...