Need to roll fenders
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 07:24 PM) [url=index.php?act=findpost&pid=57688]<{POST_SNAPBACK}>[/url]</div>
I am going to get this done this week or early next week, we should go together(setting someone up for a fun comment).........you go first........he he he
No I asked this ? a little back let me dig up that thread.......
much obliged![/b]
I am going to get this done this week or early next week, we should go together(setting someone up for a fun comment).........you go first........he he he
No I asked this ? a little back let me dig up that thread.......
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
<div class='quotetop'>QUOTE (GMoney @ Jul 22 2008, 07:28 PM) [url=index.php?act=findpost&pid=57689]<{POST_SNAPBACK}>[/url]</div>
what's your offset dude? mines +40 so a bit tight,only the rears need to be rolled it appears..
I am going to get this done this week or early next week, we should go together(setting someone up for a fun comment).........you go first........he he he
No I asked this ? a little back let me dig up that thread.......[/b]
what's your offset dude? mines +40 so a bit tight,only the rears need to be rolled it appears..
"20<cut off="">"</cut>
Here it is, maybe we can rent the one through Metrodubs.com and get a few people who would like to do this and split the fee, or maybe the Dylan Gent.
Fender roll thread
Fender roll thread
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 07:33 PM) [url=index.php?act=findpost&pid=57691]<{POST_SNAPBACK}>[/url]</div>
Mine is 18x7.5 42 offset, running 235/40/18's so I am pushing it to the very edge. Nice wide stance.......
I am tired of not being able to put people in my back seat and that oh so slow speed over any dips and speed bumps
I have heard it touch on a few occasions kind of scary has pulled the inside down a bit........I only have to do the rears as well.
what's your offset dude? mines +40 so a bit tight,only the rears need to be rolled it appears..[/b]
Mine is 18x7.5 42 offset, running 235/40/18's so I am pushing it to the very edge. Nice wide stance.......
I am tired of not being able to put people in my back seat and that oh so slow speed over any dips and speed bumps
I have heard it touch on a few occasions kind of scary has pulled the inside down a bit........I only have to do the rears as well.
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
let's do this need to save my tires and if we can get enough peeps perhaps a group sign up....
anyone else?
1. 6i_guy
2. gmoney
found this
http://www.youtube.com/watch?v=DDTK9IjKIYU
anyone else?
1. 6i_guy
2. gmoney
found this
http://www.youtube.com/watch?v=DDTK9IjKIYU
"20<cut off="">"</cut>
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 07:40 PM) [url=index.php?act=findpost&pid=57694]<{POST_SNAPBACK}>[/url]</div>
let's do this need to save my tires and if we can get enough peeps perhaps a group sign up....
anyone else?
1. 6i_guy
2. gmoney
3. 4doord
found this
http://www.youtube.com/watch?v=DDTK9IjKIYU[/b]
<div class='quotetop'>QUOTE (baker @ Jul 22 2008, 10:39 PM) [url=index.php?act=findpost&pid=57745]<{POST_SNAPBACK}>[/url]</div>
thanks Baker....Gmoney you want to call and see if we can get a discounted rate or at least prices?
I won't be able to do this until Fri eve or Sat as my car goes into the shop tomorrow..
metrodubs.com owns a fender roller that is for rent thru Autobahn Premier Service. contact randy or todd for all the details.
Autobahn Premier Service
VW, Audi, Porsche, BMW, Mercedes Tuning Specailists.
1015 West Evans Avenue, Unit D, Denver, Colorado
303-935-9065 (fax 303-935-9054)[/b]
thanks Baker....Gmoney you want to call and see if we can get a discounted rate or at least prices?
I won't be able to do this until Fri eve or Sat as my car goes into the shop tomorrow..
"20<cut off="">"</cut>
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 10:48 PM) [url=index.php?act=findpost&pid=57747]<{POST_SNAPBACK}>[/url]</div>
I will call in the morning, let you know what they say. I have Sat morning available and Sun is free as well.......4doord any of these work for you?
That is if I can get one rented....
thanks Baker....Gmoney you want to call and see if we can get a discounted rate or at least prices?
I won't be able to do this until Fri eve or Sat as my car goes into the shop tomorrow.. [/b]
I will call in the morning, let you know what they say. I have Sat morning available and Sun is free as well.......4doord any of these work for you?
That is if I can get one rented....
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
I've rolled fenders on four different cars in the past. I will tell you from personal experience that a roller used improperly will chip paint on your fenders. Not from the tool itself, but from uneven pressure when you use it. I have found the best tool hands down is a the handle of a wooden hammer. Yes, a handle from a wooden hammer, or a tool as such.
Also, whatever method you use, make sure your car sits in the sun for a good period so the paint "warms up". Much lower chance of chipping paint on the fenders if the paint is warm.
I'm more than willing to help you if you drive up to Loveland..
My $.02.
Also, whatever method you use, make sure your car sits in the sun for a good period so the paint "warms up". Much lower chance of chipping paint on the fenders if the paint is warm.
I'm more than willing to help you if you drive up to Loveland..
My $.02.
<div class='quotetop'>QUOTE (GMoney @ Jul 23 2008, 01:35 AM) [url=index.php?act=findpost&pid=57761]<{POST_SNAPBACK}>[/url]</div>
I would be available on Sunday only, have to work on Sat.
I will call in the morning, let you know what they say. I have Sat morning available and Sun is free as well.......4doord any of these work for you?
That is if I can get one rented....[/b]
I would be available on Sunday only, have to work on Sat.
Well I just secured a Fender roller from Autobahn will have it Friday through the weekend. Talked with Randy, very nice guy......The price is $50 so what ever you guys want to pitch is fine with me. I will be picking it up friday morning before work and be available after 6ish that night.......I close my store on Saturday so will only have until 2pm but have the entire day Sunday off......I have a heat gun to aid in the warming of the metal and paint, but I think the 100 degree days will also help.
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
Who is online
Users browsing this forum: No registered users and 44 guests