Page 1 of 4
Posted: Tue Jul 22, 2008 9:14
by tsx_guy
much obliged!
Posted: Tue Jul 22, 2008 9:14
by Gmoney
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 07:24 PM) [url=index.php?act=findpost&pid=57688]<{POST_SNAPBACK}>[/url]</div>
much obliged![/b]
I am going to get this done this week or early next week, we should go together(setting someone up for a fun comment).........you go first........he he he
No I asked this ? a little back let me dig up that thread.......
Posted: Tue Jul 22, 2008 9:14
by tsx_guy
<div class='quotetop'>QUOTE (GMoney @ Jul 22 2008, 07:28 PM) [url=index.php?act=findpost&pid=57689]<{POST_SNAPBACK}>[/url]</div>
I am going to get this done this week or early next week, we should go together(setting someone up for a fun comment).........you go first........he he he
No I asked this ? a little back let me dig up that thread.......[/b]
what's your offset dude? mines +40 so a bit tight,only the rears need to be rolled it appears..
Posted: Tue Jul 22, 2008 9:14
by Gmoney
Here it is, maybe we can rent the one through Metrodubs.com and get a few people who would like to do this and split the fee, or maybe the Dylan Gent.
Fender roll thread
Posted: Tue Jul 22, 2008 9:14
by Gmoney
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 07:33 PM) [url=index.php?act=findpost&pid=57691]<{POST_SNAPBACK}>[/url]</div>
what's your offset dude? mines +40 so a bit tight,only the rears need to be rolled it appears..[/b]
Mine is 18x7.5 42 offset, running 235/40/18's so I am pushing it to the very edge. Nice wide stance.......
I am tired of not being able to put people in my back seat and that oh so slow speed over any dips and speed bumps
I have heard it touch on a few occasions kind of scary has pulled the inside down a bit........I only have to do the rears as well.
Posted: Tue Jul 22, 2008 9:14
by tsx_guy
let's do this need to save my tires and if we can get enough peeps perhaps a group sign up....
anyone else?
1. 6i_guy
2. gmoney
found this
http://www.youtube.com/watch?v=DDTK9IjKIYU
Posted: Tue Jul 22, 2008 9:14
by 4doord
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 07:40 PM) [url=index.php?act=findpost&pid=57694]<{POST_SNAPBACK}>[/url]</div>
Posted: Tue Jul 22, 2008 9:14
by Gmoney
I will make some calls tomorrow to see what I can find out.....
Posted: Tue Jul 22, 2008 9:14
by baker
metrodubs.com owns a fender roller that is for rent thru Autobahn Premier Service. contact randy or todd for all the details.
Autobahn Premier Service
VW, Audi, Porsche, BMW, Mercedes Tuning Specailists.
1015 West Evans Avenue, Unit D, Denver, Colorado
303-935-9065 (fax 303-935-9054)
Posted: Tue Jul 22, 2008 9:14
by tsx_guy
<div class='quotetop'>QUOTE (baker @ Jul 22 2008, 10:39 PM) [url=index.php?act=findpost&pid=57745]<{POST_SNAPBACK}>[/url]</div>
metrodubs.com owns a fender roller that is for rent thru Autobahn Premier Service. contact randy or todd for all the details.
Autobahn Premier Service
VW, Audi, Porsche, BMW, Mercedes Tuning Specailists.
1015 West Evans Avenue, Unit D, Denver, Colorado
303-935-9065 (fax 303-935-9054)[/b]
thanks Baker....Gmoney you want to call and see if we can get a discounted rate or at least prices?
I won't be able to do this until Fri eve or Sat as my car goes into the shop tomorrow..
Posted: Tue Jul 22, 2008 9:14
by dommo_g
Don't know what part of town you guys are in, but you can call PFI in Ft. Collins and ask about renting one from Kevin Warren. Worth a shot.
Posted: Wed Jul 23, 2008 9:14
by Gmoney
<div class='quotetop'>QUOTE (6i_guy @ Jul 22 2008, 10:48 PM) [url=index.php?act=findpost&pid=57747]<{POST_SNAPBACK}>[/url]</div>
thanks Baker....Gmoney you want to call and see if we can get a discounted rate or at least prices?
I won't be able to do this until Fri eve or Sat as my car goes into the shop tomorrow..
[/b]
I will call in the morning, let you know what they say. I have Sat morning available and Sun is free as well.......4doord any of these work for you?
That is if I can get one rented....
Posted: Wed Jul 23, 2008 9:14
by S4poor
I've rolled fenders on four different cars in the past. I will tell you from personal experience that a roller used improperly will chip paint on your fenders. Not from the tool itself, but from uneven pressure when you use it. I have found the best tool hands down is a the handle of a wooden hammer. Yes, a handle from a wooden hammer, or a tool as such.
Also, whatever method you use, make sure your car sits in the sun for a good period so the paint "warms up". Much lower chance of chipping paint on the fenders if the paint is warm.
I'm more than willing to help you if you drive up to Loveland..
My $.02.
Posted: Wed Jul 23, 2008 9:14
by 4doord
<div class='quotetop'>QUOTE (GMoney @ Jul 23 2008, 01:35 AM) [url=index.php?act=findpost&pid=57761]<{POST_SNAPBACK}>[/url]</div>
I will call in the morning, let you know what they say. I have Sat morning available and Sun is free as well.......4doord any of these work for you?
That is if I can get one rented....[/b]
I would be available on Sunday only, have to work on Sat.
Posted: Wed Jul 23, 2008 9:14
by Gmoney
Well I just secured a Fender roller from Autobahn will have it Friday through the weekend. Talked with Randy, very nice guy......The price is $50 so what ever you guys want to pitch is fine with me. I will be picking it up friday morning before work and be available after 6ish that night.......I close my store on Saturday so will only have until 2pm but have the entire day Sunday off......I have a heat gun to aid in the warming of the metal and paint, but I think the 100 degree days will also help.