Page 1 of 1
Rattle Can Rims & Turbo Timer
Posted: Sun Aug 16, 2009 9:14
by Sixburgher
Posted: Sun Aug 16, 2009 9:14
by Colombia28
HOT!! Looks so good.
Posted: Sun Aug 16, 2009 9:14
by chickenwafer
Looks good!
Did you put any clearcoat on the wheels? Otherwise they will chip...a friend did this on his RX-8 back in Arizona and after a few months they had a bunch of chips on them and didn't look so hot.
Posted: Sun Aug 16, 2009 9:14
by T-time
nice spot for the tt. can you still plug in a obd II scanner?
Posted: Sun Aug 16, 2009 9:14
by bellalyssa
Looks great!
Posted: Sun Aug 16, 2009 9:14
by C170
give me 3 more years and i can get something as sexy as that!!!
Posted: Sun Aug 16, 2009 9:14
by Cesaros
dayyyum son! who's sexy grey hatch is that in 2 of those pictures???
Posted: Sun Aug 16, 2009 9:14
by Sixburgher
chickenwafer wrote:Looks good!
Did you put any clearcoat on the wheels? Otherwise they will chip...a friend did this on his RX-8 back in Arizona and after a few months they had a bunch of chips on them and didn't look so hot.
I did. I put 3 coats of self-etching primer, 3 coats of black, and 3 coats of clear coat. They turned out pretty good so I'm hoping they will stay that way for awhile. By the time they start chipping I should have some Konig Feathers
T-time wrote:nice spot for the tt. can you still plug in a obd II scanner?
There is plenty of room actually. It mounts with double-sided tape so if I really needed to get in there, it would come off pretty smoothly.
Thanks for the kind words everyone!
Posted: Mon Aug 17, 2009 9:14
by Sixburgher
Cesaros wrote:dayyyum son! who's sexy grey hatch is that in 2 of those pictures???
Some DOUCHEBAG kept following me around like we were really close friends and almost ghey. PSH
lol but seriously, everyone at that failure of a car show was kinda taken aback by us. Hatch Cocks roll 2 deep at LEAST. lol
Let's do your damn rims already Joe!
Posted: Mon Aug 17, 2009 9:14
by Cesaros
Sixburgher wrote:Some DOUCHEBAG kept following me around like we were really close friends and almost ghey. PSH
lol but seriously, everyone at that failure of a car show was kinda taken aback by us. Hatch Cocks roll 2 deep at LEAST. lol
Let's do your damn rims already Joe!
bwahaha...2 dizzeeep.
noone expected 2 MAAAHZDAHS to roll in and have more looks than the NSX.
Posted: Thu Oct 01, 2009 9:14
by rmeeker13
I rattle canned my wheels too! Just until i get some new rubber tho, then they'll get powdercoated. Looks good man!