Well I am going through a separation and need to sell the car to get a SUV.
This car is in almost perfect shape, and is probably one of the cleanest out there. I have some Modifications done to the car now, they have been in place for over three years. The car runs like new, no problems what so ever. All maintinance has been done by me or qualified tech's, I have all receipts. All TSB's have been done on the car. I even had the clutch replaced per TSB at 20,000 miles, so that is a perk. All miles have been from highway commuting, C-470 everyday for the past 4 years. Only a couple small door dings, the paint is in great shape. I am willing to sell the car a couple ways, as is with everything installed and with custom wheels and stock wheels with blizzack tires with two seasons left. Or put back to stock with stock wheels and will sell all parts off. I would rather sell it with everything and that would be the best deal for someone looking for a great reliable fast car. Some still know me from this forum and can vouch for my character.
Option 1:
$17,500
The stuff:
-18x7.5 Arays Engineering wheels with 20% left tread tires(enough to finish this year out, you will get the discount tire warranties so the new set will be prorated next year for you)
-Stock wheels in good shape, they come with full set of Blizzack tires with 1.5 seasons on them.
-Full set RPM LED side markers/Rear Reflector kit, dark smoke
-Carbon Fiber grill
-Custom front license plate mount, tow hook location
-Sharkfin
-Rpm Street springs for just the right height
-MPS badging(to be different)
-Fully tinted windows 30%
-Aeroforce gauge custom mounted in center vent
-Streetunit dogbone rear engine mount
-Turbine Tech front engine mount(car shifts so solid)
-1 step colder plugs(running 15psi boost)
-CP-e Cold air Intake
-Darkstar turbo inlet
-Synapse BOV with hot-pipe tap(works so well)
-3.5 ETS TMIC
-Streetunit test pipe
You will also get every stock part that came off the car.......
Option 2:
$16000
Just the stock wheels with 20% left tread
All stock parts will be installed and no aftermarket parts will be included except the license plate mount, RPM side markers/rear reflector, Sharkfin, and RPM springs.........
I will add pictures later today.......
Greg
970-310-9669
wineguru1@gmail.com
2006 Mazdaspeed6 Sport 53,000 miles
2006 Mazdaspeed6 Sport 53,000 miles
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
Thanks all, yeah, its not easy:(........I will see what responses I get, not in any real hurry to sell it, just wanted to see if there was any interest.....Thanks Greg
*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
- MSP SuperStreet
- Senior Member
- Posts: 603
- Joined: Sun Apr 27, 2008 9:14
- Location: Glenwood Springs
- Contact:
Greg....wow, sorry to hear man. I wish I could afford your car, it is gorgeous. You are the one who turned me onto Mazda6's. BTW...you still owe me a ride..LOL
2007 Performance White Mazda 6 S - V6, 5-speed
-Bone stock...except for a shark fin antenna and tint.
Current project in garage:
1988 Ford Mustang...my race car
-Bone stock...except for a shark fin antenna and tint.
Current project in garage:
1988 Ford Mustang...my race car
Just wanted to offer up a good deal to any one out there that might be looking for a nice deal. I finally found a Pathfinder I like enough to part ways for real..........I will give any Mazda club member the car with everything for $16500.......Now that is a deal for everything installed and in perfect working order, just come by and take a test drive. I even have a dealer that will finance you if you have decent credit, so win win. They got me a 6.4% rate for 72 months with a 695 credit score!!!!
If nobody wants her I will entertain reasonable offers on all the after market parts........excluding side markers, springs, sharkfin........As I will be trading it in for $14000 stock..........
-18x7.5/ 42 offset Black Chrome Arays Engineering wheels only-------$450(cost me $1200 plus shipping from UK) one of a kind.....
-Full set of Blizzack tires with 1.5 seasons on them.------winter tires only $350
-Carbon Fiber grill------$100 pending sale
-Custom front license plate mount, tow hook location-----$25 SOLD
-Aeroforce gauge custom mounted in center vent-------$125 SOLD
-Streetunit dogbone rear engine mount------$40 SOLD
-Turbine Tech front engine mount(car shifts so solid)------$175
-CP-e Cold air Intake-------$150
-Darkstar turbo inlet--------$20 SOLD
-Synapse BOV with hot-pipe tap(works so well)-------$150
-3.5 ETS TMIC----------$320 SOLD
-Streetunit test pipe-------$20 Traded it in sorry Barn
-All season Floor mats---------$40(will fit regular 6)
-Front side markers LED from RPM---------$30(one has a broken clip, but I just used 3M double sided tape) pending sale
All prices are what I think is a crazy good deal.......
I will take offers and decide if it is beneficial to sell it as a whole or part it out. I just don't want double payments.........Somebody just by it as a whole, you will have one of the best looking MS6's in the state......It still kills me that I have to part ways, but life happens
If nobody wants her I will entertain reasonable offers on all the after market parts........excluding side markers, springs, sharkfin........As I will be trading it in for $14000 stock..........
-18x7.5/ 42 offset Black Chrome Arays Engineering wheels only-------$450(cost me $1200 plus shipping from UK) one of a kind.....
-Full set of Blizzack tires with 1.5 seasons on them.------winter tires only $350
-Carbon Fiber grill------$100 pending sale
-Custom front license plate mount, tow hook location-----$25 SOLD
-Aeroforce gauge custom mounted in center vent-------$125 SOLD
-Streetunit dogbone rear engine mount------$40 SOLD
-Turbine Tech front engine mount(car shifts so solid)------$175
-CP-e Cold air Intake-------$150
-Darkstar turbo inlet--------$20 SOLD
-Synapse BOV with hot-pipe tap(works so well)-------$150
-3.5 ETS TMIC----------$320 SOLD
-Streetunit test pipe-------$20 Traded it in sorry Barn
-All season Floor mats---------$40(will fit regular 6)
-Front side markers LED from RPM---------$30(one has a broken clip, but I just used 3M double sided tape) pending sale
All prices are what I think is a crazy good deal.......
I will take offers and decide if it is beneficial to sell it as a whole or part it out. I just don't want double payments.........Somebody just by it as a whole, you will have one of the best looking MS6's in the state......It still kills me that I have to part ways, but life happens

*CP-e CAI
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
*Turbo Inlet
*ETS 3.5" TMIC
*SU Test Pipe
*RPM Street Springs
*AeroForce Gauge
*RPM LED Side/Rear Markers
*SU Rear Engine mount
*Turbine Tech Front engine mount
*Cp-e Rear Diff Mount
*TurboSmart MBC
[SIGPIC][/SIGPIC]
Who is online
Users browsing this forum: No registered users and 22 guests
