F/S: Bronze RX-8 Wheels
- MN Speedster
 - Junior Member
 - Posts: 7
 - Joined: Thu Mar 11, 2010 9:14
 - Location: Littleton
 - Contact:
 
Pm'd...
			
									
									[font="Century Gothic"]2008 CWP Speed3[/font]
COBB short ram intake, SU Motor Mounts, Prosport Boost gauge,Yellow Fog Light Overlays
[color="Blue"]Flick[color="Magenta"]r[/color][/color]
						COBB short ram intake, SU Motor Mounts, Prosport Boost gauge,Yellow Fog Light Overlays
[color="Blue"]Flick[color="Magenta"]r[/color][/color]
I wouldn't mind seeing what the bronze looked like against my silverstone s2000, but I would only be color checking...
GLWS. Powdercoating in this area is nuts. I'm actually considering stripping my wheels and driving them back over to Nebraska (8 hours each way) and have them coated there. Total price is about 1/4 what people are getting here. I just don't get it.
			
									
									
						GLWS. Powdercoating in this area is nuts. I'm actually considering stripping my wheels and driving them back over to Nebraska (8 hours each way) and have them coated there. Total price is about 1/4 what people are getting here. I just don't get it.
Shadowden wrote:I wouldn't mind seeing what the bronze looked like against my silverstone s2000, but I would only be color checking...
GLWS. Powdercoating in this area is nuts. I'm actually considering stripping my wheels and driving them back over to Nebraska (8 hours each way) and have them coated there. Total price is about 1/4 what people are getting here. I just don't get it.
Did you factor in fuel? Just curious.
- AuroraAxela
 - Posts: 397
 - Joined: Wed Dec 14, 2011 9:14
 - Location: Aurora, CO
 
Shadowden wrote:I wouldn't mind seeing what the bronze looked like against my silverstone s2000, but I would only be color checking...
I think bronze on your S2K would look great, man...
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]
[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
GR-8 wrote:Did you factor in fuel? Just curious.
If I go to Nebraska, I would visit a friend, and he has a good friend that is a driving instructor at a nearby track. I would make a trip of it and have the wheels done as a bonus.
Really, if a local person there can get a set of wheels done for between 75 and 150 dollars there, why can't a local here have the same job done within a reasonably siumilar cost. I don't think our cost of living is 150-200%, but I could be wrong.
Sorry Rich, can't have Mazda wheels on a Honda...the world would stop spinning out of anger. I was just trying to put the point across that the powdercoat on your wheels is a value to a future buyer...especially in the Denver Metro area.
Andyscums wrote:If you dropped the price to 400 I am sure they would sell, 700 is a little steep too in my opinion. Granted you have money into them with the powder coating and everything, sometimes you need to bite the bullet and take a loss if you REALLY want to sell them.
I'm probably not going to list these at $400 but thanks for the tip.
Shadowden wrote:I bet those bronze wheels would look good on AA's Cosmic Blue sedan (I think that is the right name for the color).
I can vouch for these looking good on a Cosmic Blue :-)
2007 [color="RoyalBlue"]Cosmic Blue[/color] Mazdaspeed 3 [color="Red"]GT[/color]
						Who is online
Users browsing this forum: No registered users and 117 guests