I have a few parts for a 2007 Mazdaspeed3...I sold mine a few months ago everything works as it should and looks like new.

Stock - Front and Rear Sway bars (Make an offer) [color="Red"](sold)[/color]
Stock - Front and Rear springs ($50) great for a regular MZ3!!


Cobb Accessport v2 (with all required cables and attachments $400.00) called cobb today they said it will work with all MS3's and 2006-07 MS6's. [color="red"](sold)[/color]http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110603/b_153340.jpg


Aeroforce interceptor scan gauge - check/clear DTC's, anything the ECU controls this will read and display...can pick any 2 items to display (i always had AFR and Boost up). Includes a spare cover for just behind the wheel and a CF guage holder as depicted in the picture. (looking for $200 with everything) (will include an A pillar mount i just found...not a full a pillar replacement though) [color="Red"]SOLD![/color]
http://media9.dropshots.com/photos/145548/20110603/b_153144.jpg
http://media11.dropshots.com/photos/145548/20110603/b_153203.jpg
http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110603/b_153235.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110603/b_153251.jpg

Wheels...comes with extra valve stems and all lugs!! Doing $450 for the wheels with tires and TMPS!!
http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110604/b_143119.jpg
http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110604/b_143125.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110604/b_143129.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110604/b_143138.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110604/b_143144.jpg
http://www.dropshots.com/zoom.html?large=http://media9.dropshots.com/photos/145548/20110604/b_143232.jpg

As the last picture shows...there is more tread than i thought there was.

Also found a parcel tray for the back of a Mazdaspeed3

I would rather everything be local pick up...I am even willing to meet you some where. Thanks for looking at this add.

I have all this and 4x wheels off a Mazdaspeed3...the tires are no good but the TMPS is still working great and the wheels only have 20k or so miles on them so theres very little in the way of damage. Ill clean them up this weekend and post pictures. I think $600 is pretty fair for the wheels but I think I am open to offers.

How much for the four wheels?

If I had $400, I'd take the AP, but I only have $150 in the mod fund.

Sent a PM to colombia

Great price on the AP. GLWS.

some pictures added...ill have more soon.

More pictures and information...have had interest but no one pulling the trigger. If you dont think a price is fair or you can find a better price...send me a link and we can talk about it.

Would installing the scan gauge be difficult or do you just need to plug it in somewhere (OBD-II port?) and mount it in the car?

It reads all the information it can display from the OBDII port. Plug and play.

You guys got first dibs and no one bit...tomorrow i start advertising everywhere else at slightly higher prices...

Price drop...
Ill do $150 for the Gauge and pods

$450 for all 4 wheels and tires that have working TMPS inside!! (local pick up or will meet you somewhere!)

Coulda wrote:Price drop...
Ill do $150 for the Gauge and pods

$450 for all 4 wheels and tires that have working TMPS inside!! (local pick up or will meet you somewhere!)

Do you still have these? Sorry for never getting back to you.

I do still have the wheels...the gauge and gauge pod are gone though.

I'll take the wheels and tires.