Traded my car so I'm looking to clean out the garage a bit....
JBR Tru-Torsion .250 Competition RSB. Near perfect shape. Used very little before my car was traded. $150 vs. $315 new. Come with billet mounts.
Hawk HPS front pads. Used for 200 street miles and 1 autocross - $20
Stock FSB - $20
Stock Springs - $20
Stock Front Rotors - $10 - Used but in great shape.
Come take it all for $150.
email me painegreg27 at gmail.com if interested.
Mazdaspeed3 Parts FS
- 2011silverspeed3
- Member
- Posts: 10
- Joined: Fri Oct 12, 2012 9:14
- Location: Erie, co
Mazdaspeed3 Parts FS
2012 RMS D Stock Point Champion
2011silverspeed3 wrote:Traded my car so I'm looking to clean out the garage a bit....
JBR Tru-Torsion .250 Competition RSB. Near perfect shape. Used very little before my car was traded. $150 vs. $315 new. Come with billet mounts.
Hawk HPS front pads. Used for 200 street miles and 1 autocross - $20
Stock FSB - $20
Stock Springs - $20
Stock Front Rotors - $10 - Used but in great shape.
Come take it all for $150.
email me painegreg27 at gmail.com if interested.
Nice stuff. Buy a great RSB get lots of extra stuff for free is a steller deal!
I really liked the JBR parts I had on my MZ3.
- 2011silverspeed3
- Member
- Posts: 10
- Joined: Fri Oct 12, 2012 9:14
- Location: Erie, co
Sorry for the late response. I really like the FRS. I miss the power/acceleration of the MS3 though. And the FRS is not really a practical car - no back seats and very small trunk.
But no matter what I did the MS3 would never negotiate an autocross course like the FRS does. I do however need to learn how to drive all over again. The two are very, very different.
But no matter what I did the MS3 would never negotiate an autocross course like the FRS does. I do however need to learn how to drive all over again. The two are very, very different.
2012 RMS D Stock Point Champion
- 2011silverspeed3
- Member
- Posts: 10
- Joined: Fri Oct 12, 2012 9:14
- Location: Erie, co
2011silverspeed3 wrote:One last bump. Come get the JBR swaybar for $70. I still have the factory front bar and spring which are your for free if you want them.
I'm interested in the freebies you still have, if my 2nd gen purchase-deal goes through in the next week or two,
Thanks either way,
<a href="http://www.alaze.us">
<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
[/SIZE]<img border="0" src="http://alaze.us/bd/squidbilly.gif" width="500" height="128"></a>
[SIZE="1"][color="SeaGreen"]speed reknize' speed[/color]
- AuroraAxela
- Posts: 397
- Joined: Wed Dec 14, 2011 9:14
- Location: Aurora, CO
I have a friend who might be after the sway bar.... I'll message you
[SIGPIC][/SIGPIC]
[color="Blue"][SIZE="3"]2009 Mazdaspeed 3 GT[/SIZE][/color]
[SIZE="1"][color="Blue"][color="Blue"]POWERTRAIN: GTX3067R . Cobb AP . Cobb 3-port . Autotech internals . HTP 3" intake . cp-e FMIC . Forge v1 BPV . TWM STS . CNT Turboback
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
NGK 1-step colder . Bosch 3-bar . cp-e xFlex™ RMM/TMM/PMM . CorkSport recirc tube . Kosmic EGR delete
SUSPENSION: K-Sport coilovers . Whiteline RSB . custom MS6 wheels
EXTERIOR: cp-e TowPlate . DDM Tuning 5000K HID low/fog
INTERIOR: Defi boost gauge/cp-e defroster mount . NRG shift knob . CorkSport LEDs[/color][/color][/SIZE]
- 2011silverspeed3
- Member
- Posts: 10
- Joined: Fri Oct 12, 2012 9:14
- Location: Erie, co
- 2011silverspeed3
- Member
- Posts: 10
- Joined: Fri Oct 12, 2012 9:14
- Location: Erie, co
- 2011silverspeed3
- Member
- Posts: 10
- Joined: Fri Oct 12, 2012 9:14
- Location: Erie, co
-
- Junior Member
- Posts: 1
- Joined: Fri Aug 26, 2016 9:14
Re: Mazdaspeed3 Parts FS
still have the sway bar? I'm interested
- RX-7 Chris
- Posts: 7800
- Joined: Tue Oct 02, 2007 9:14
- Location: Colorado Springs
- Contact:
Re: Mazdaspeed3 Parts FS
This member hasn't logged on in over a year.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]
1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm
[size=100]RIP 1983 RX-7[/SIZE]
My Car Blog
Who is online
Users browsing this forum: No registered users and 45 guests