Electrical Issue Already

Tint, Paint, Lighting, Comfort
User avatar
Stealth01
Senior Member
Posts: 2881
Joined: Fri Sep 21, 2007 9:14
Location: In the 7-1-9
Contact:

Postby Stealth01 » Mon Apr 21, 2008 9:14

OK, so when I used the four window controls on the driver's side yesterday, only the driver's window would go down. Not the other three. I noticed that the 194s in the doors were out, so I replaced them and magically, the windows worked again.

Then today, only the front and rear DRIVER'S side ones go down from that panel. Not the passenger side ones.

All work normally from their own button, and this time the door lights are functional.

Ideas?
Stealth01
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts

GoToTheJoe
Member
Posts: 68
Joined: Sat Sep 22, 2007 9:14
Location: Westminster
Contact:

Postby GoToTheJoe » Mon Apr 21, 2008 9:14

Did you happen to disconnect the negative battery cable when you changed the bulbs? The Speed6 has a "feature" that you have to reprogram the windows whenever power is lost.

Roll windows down all the way with it's own button, then roll all the back up and hold for about 2 seconds. You will hear a clunking sound like a reset. Do that on all windows.

Not sure if it is exactly same since usually only the drivers window will operate from the panel and you are saying you have two working but might be worth a try?
--brian

2006 MazdaSpeed6 GT ** Whitewater Pearl Mica ** 5Zigen Pro Racer ZR+520 Wheels - Ceramic Bronze ** Navigation ** Integrated Sirius Radio ** Black and White Leather Interior ** 18% window tint ** Clear Bra ** Moonroof ** Wheel Locks ** MazdaSpeed CAI ** VG Sharkfin ** CF MazdaSpeed License Plate Holder ** Cargo Net ** Firestone Firehawk Wide Oval Indy 500 225/45r/18 ** Lamin-x Charcoal Headlight Protector **

User avatar
Stealth01
Senior Member
Posts: 2881
Joined: Fri Sep 21, 2007 9:14
Location: In the 7-1-9
Contact:

Postby Stealth01 » Mon Apr 21, 2008 9:14

<div class='quotetop'>QUOTE (GoToTheJoe @ Apr 21 2008, 05:42 PM) [url=index.php?act=findpost&pid=42161]<{POST_SNAPBACK}>[/url]</div>
Did you happen to disconnect the negative battery cable when you changed the bulbs? The Speed6 has a "feature" that you have to reprogram the windows whenever power is lost.

Roll windows down all the way with it's own button, then roll all the back up and hold for about 2 seconds. You will hear a clunking sound like a reset. Do that on all windows.

Not sure if it is exactly same since usually only the drivers window will operate from the panel and you are saying you have two working but might be worth a try?[/b]


Yes, I did unhook the battery, so that is probably the issue.
Stealth01

2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts

User avatar
Stealth01
Senior Member
Posts: 2881
Joined: Fri Sep 21, 2007 9:14
Location: In the 7-1-9
Contact:

Postby Stealth01 » Mon Apr 21, 2008 9:14

That did it! Fixed. Thanks!
Stealth01

2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Mon Apr 21, 2008 9:14

<div class='quotetop'>QUOTE (Stealth01 @ Apr 21 2008, 06:51 PM) [url=index.php?act=findpost&pid=42169]<{POST_SNAPBACK}>[/url]</div>
That did it! Fixed. Thanks![/b]


RTFM j/k :lol: I had the problem after my CAI install and was about to post but then I decided to read my owner's manual and bam! done.
"20<cut off="">"</cut>

GoToTheJoe
Member
Posts: 68
Joined: Sat Sep 22, 2007 9:14
Location: Westminster
Contact:

Postby GoToTheJoe » Mon Apr 21, 2008 9:14

Please take note that at 5:42p on 4/21/08...I became useful on this site!! That only took (how long has this site been up?) :)
--brian

2006 MazdaSpeed6 GT ** Whitewater Pearl Mica ** 5Zigen Pro Racer ZR+520 Wheels - Ceramic Bronze ** Navigation ** Integrated Sirius Radio ** Black and White Leather Interior ** 18% window tint ** Clear Bra ** Moonroof ** Wheel Locks ** MazdaSpeed CAI ** VG Sharkfin ** CF MazdaSpeed License Plate Holder ** Cargo Net ** Firestone Firehawk Wide Oval Indy 500 225/45r/18 ** Lamin-x Charcoal Headlight Protector **

TJditallo

Postby TJditallo » Mon Apr 21, 2008 9:14

lol I was just going to say check the window lock button because that would prevent the other windows from working as well but I did not want to make myself sound like a jack ass for sounding like a know it all. Glad u got it figured out though.

User avatar
memphis
Senior Member
Posts: 998
Joined: Thu Sep 20, 2007 9:14
Location: Monument
Contact:

Postby memphis » Mon Apr 21, 2008 9:14

<div class='quotetop'>QUOTE (GoToTheJoe @ Apr 21 2008, 07:01 PM) [url=index.php?act=findpost&pid=42177]<{POST_SNAPBACK}>[/url]</div>
Please take note that at 5:42p on 4/21/08...I became useful on this site!! That only took (how long has this site been up?) :)[/b]



you are a GOD!!!! :25b530fa:

User avatar
Stealth01
Senior Member
Posts: 2881
Joined: Fri Sep 21, 2007 9:14
Location: In the 7-1-9
Contact:

Postby Stealth01 » Mon Apr 21, 2008 9:14

Over on the 6club, I got kinda scolded for not reading the manual. Apparently, it's in there. :D
Stealth01

2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts

TJditallo

Postby TJditallo » Mon Apr 21, 2008 9:14

I acttually picked up that tip form a dealler guy who was with me on my test drive for my car and he told me how to do it because the car we where in had had its battery disconnected. O and that way of "resetting" the windows works on any car with automatic windows and I would imagine that most cars have to be reset after having its battery disconnected.

User avatar
goldrocket
Posts: 857
Joined: Wed Oct 31, 2007 9:14
Location: Colorado Springs
Contact:

Postby goldrocket » Tue Apr 22, 2008 9:14

Man I must be an old fart, I remember when window went up and down with switches that only needed voltage, not a computer......
Al says
Anything worth doing is worth overdoing!:eek:

Image

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Tue Apr 22, 2008 9:14

<div class='quotetop'>QUOTE (GoToTheJoe @ Apr 21 2008, 07:01 PM) [url=index.php?act=findpost&pid=42177]<{POST_SNAPBACK}>[/url]</div>
Please take note that at 5:42p on 4/21/08...I became useful on this site!! That only took (how long has this site been up?) :)[/b]


good for you...I am still trying to be useful.... :lol:
"20<cut off="">"</cut>

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Wed Apr 23, 2008 9:14

<div class='quotetop'>QUOTE (goldrocket @ Apr 22 2008, 07:44 AM) [url=index.php?act=findpost&pid=42237]<{POST_SNAPBACK}>[/url]</div>
Man I must be an old fart, I remember when window went up and down with switches that only needed voltage, not a computer......[/b]

I was thinking the same thing and I'm not that old haha.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog


Return to “Interior Modifications”

Who is online

Users browsing this forum: No registered users and 15 guests