My TII Progress

iani1.1 · Postby **iani1.1** » Mon May 25, 2009 9:14

Ok, I know I have been saying my car will get done soon but i had alot of ideas which has slowed my progress but it will get done!!

Originally i wanted to paint the engine bay Gunmetal, then i thought it was a little too tacky soo i went with the RustProof Black.

Once the engine bay is finished I will be dropping in the TII. Since it is an Jspec S5 TII I there are alot of modifications i have to do with the wiring harness since the wiring harness runs to the left rather than the right. Also my emissions system must be removed. Other than that im pretty set.

So enough talking Ill just let the pics do the talking...

MSP SuperStreet · Postby **MSP SuperStreet** » Mon May 25, 2009 9:14

Glad to hear your build is still progressing forward.
It best to get it done right rather than speeding thru it and having regrets later.
Thanks for posting pics. Here's to getting your Ride back on the road soon. There is still allot of summer left for you to get back behind the wheel. Looking forward to checking it out soon.

iani1.1 · Postby **iani1.1** » Mon May 25, 2009 9:14

thanks i needed that. i finished painting the engine bay today and right now im working on the wiring harness and so far its been a pain in the ass but whatever. hopefully ill be dropping in the motor by this weekend. ill post pics of the engine bay tomorrow.

Postby **RX-7 Chris** » Tue May 26, 2009 9:14

glad this is getting done, lookin good

speedjunkie · Postby **speedjunkie** » Wed May 27, 2009 9:14

Looks good man! Hopefully we'll BOTH be able to drive this summer yet haha. Although I'm not sure if I agree with the comment of there being a lot of summer left haha.

iani1.1 · Postby **iani1.1** » Thu May 28, 2009 9:14

yea its almost june and its been down since january. hopefully itll be driveable by early to mid june.

Postby **RX-7 Chris** » Fri May 29, 2009 9:14

Do you need any help getting it done?

Ranger · Postby **Ranger** » Fri May 29, 2009 9:14

Yeah +1, let's get your car up and running! What all still needs to be done?

iani1.1 · Postby **iani1.1** » Fri May 29, 2009 9:14

RX-7 Chris wrote:Do you need any help getting it done?

its alright my dad is helping me get the engine in.

Ranger wrote:Yeah +1, let's get your car up and running! What all still needs to be done?

gotta redo the wiring harness, install the megasquirt, and get everything connected and lubed. theres not much left, its just depends on how much free time i have.

iani1.1 · Postby **iani1.1** » Sun May 31, 2009 9:14

alright due to minor setbacks, the engine isnt still in yet. my flywheel and clutch still isnt here. i did finish rewiring the harness swapping s4 to s5 connectors and removing my emissions, swapping s5 to s4 alternator wires, got the engine bay all tidied up, ordered a bunch a crap like block off plates, intercooler piping, etc.

i decided not to hook up the megasquirt til i get a bigger turbo or bigger injectors. but i do need a n374 boost pressure sensor if anyone has one or knows anyone that has it. pm me.

alright enough of that here are some pics i took today. enjoy

BRC · Postby **BRC** » Sun May 31, 2009 9:14

now thats a nice lookin engine bay! mines full of pine needles

iani1.1 · Postby **iani1.1** » Tue Jun 16, 2009 9:14

alright i havnt updated this thing in a long while, ive been xtremely busy with work and school lately but i did receive my flywheel and just got it bolted on. just ordered the pilot bearing and should be here tomorrow and took work off to drop in the engine. hopefully i can have it running by tomorrow or friday but we'll see. yes that is a top mount that im using as a front mount. painted the manifold cause i was bored waiting for the flywheel

chickenwafer · Postby **chickenwafer** » Tue Jun 16, 2009 9:14

Good stuff man

Postby **RX-7 Chris** » Wed Jun 17, 2009 9:14

can't wait to see it done. Are you just using the top mount temporarily?

*DarthRX8* · Postby ***DarthRX8*** » Wed Jun 17, 2009 9:14

Looking good!

My TII Progress

My TII Progress

Who is online