help please!
help please!
Does anyone know if the VIN number for a mazda speed6 is writen on the engine block anywhere?? I do not have it imprinted on my windshield and really need it in order to pass emissions... any help would be greatly appreciated!
-
LaginWagon
- Posts: 267
- Joined: Wed Nov 04, 2009 9:14
- Location: Heaven
yeah they said at the emissions place that it had to be stamped on the car. I have the sticker on the door jam and my title and everything with my VIN number, but thats not good enough for them! so the only other place is on the engine block somewhere, but I cant find the VIN anywhere under the hood...
not to be a stickler or anything....but shouldnt it be printed on the dash, not the windshield? the windshield should only have a looking strip like you said, but there should still be a plate with the VIN riveted to the dash.
2008.5 CWP Mazdaspeed3
-Cobb AP
-JBR 88 duro RMM
-JBR Stage2 PowerPath Intake
-JBR Mudflaps
In the lower-left corner (driver's side lower corner) of the windshield on mine, there's a rectangular window in the dark strip of the glass. Through that, you can see the VIN code on a metal plate in the dash. That is supposed to be the official VIN stamp for the car. It's very difficult to see without a flashlight, and hard as hell to read. Other than that, I don't know if there's even another one.
A stamp on the engine would only be valid on a car with its original engine. What if one had blown and had its engine replaced?
Sounds like the people doing your emissions are clueless.
A stamp on the engine would only be valid on a car with its original engine. What if one had blown and had its engine replaced?
Sounds like the people doing your emissions are clueless.
Stealth01
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
- chickenwafer
- Posts: 2515
- Joined: Wed Mar 11, 2009 9:14
- Location: Greeley
Beej336 wrote:not to be a stickler or anything....but shouldnt it be printed on the dash, not the windshield? the windshield should only have a looking strip like you said, but there should still be a plate with the VIN riveted to the dash.
It is printed on the dash, but MS6's have their VIN in a different location than regular Mazda6's, so it sounds like his windshield was replaced at some point with a regular 6 windshield and not an MS6 windshield, thus the "window" in the windshield will not lineup so you can not see the VIN.
I'm not positive on the MS6, but I know they sometimes stamp the VIN under the hood, near the passenger side just under the windshield wiper area, still under the hood. I know my RX-8 had this and most of my other cars had this as well.

chickenwafer wrote:It is printed on the dash, but MS6's have their VIN in a different location than regular Mazda6's, so it sounds like his windshield was replaced at some point with a regular 6 windshield and not an MS6 windshield, thus the "window" in the windshield will not lineup so you can not see the VIN.
I'm not positive on the MS6, but I know they sometimes stamp the VIN under the hood, near the passenger side just under the windshield wiper area, still under the hood. I know my RX-8 had this and most of my other cars had this as well.
I'll check the under-hood location...gimme a minute.
Stealth01
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
Did not see it under there at all.
Stealth01
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
2006 Mazdaspeed 6 GT
SURE Full3 Aeros ID300 SRI, SURE Torq R6 RMM, SURE Shortcut/Countershift, SURE Anchors, Dunlop Winterspot M3s (Winter Shoes), "O" Series Stubby Antenna, Red LED Dome & Door Lights, Whistler Pro-78 RD Hardwired, SURE Dreadnaught, Juggernaught, SURE Flow M6 TP, SURE Charge Tubes, Hawk HPS F/R Pads, Technafit SSBLs, StopTech Rotors, Cobb AP, SURE Ventus in 50-50 Hybrid Mode, [color="Lime"] PERM Tune[/color] (Stratified Auto) Coming soon: Autotech FP Internals, S6 Mounts
Yes there SHOULD be, but I have looked and i cannot find it anywhere. The stuff about my windshield was all correct though- I cant read the VIN on the dash through the rectangle probably because my window was replaced. I go to school in washington though so I am thinking about just trying to register it up there, maybe they wont be so crazy about VIN #'s
Who is online
Users browsing this forum: No registered users and 66 guests


