First Gen RX-7 Part Out

List your for sale, or wanted, items here. Pictures are required for all FS items. Minimum post count of 10 for selling any item.
User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

First Gen RX-7 Part Out

Postby RX-7 Chris » Wed Oct 06, 2010 9:14

I will be starting to part out my 1983 GSL in the next few weeks and wanted to get a feeler out there. I will be keeping the SP 12A motor and most of the associated parts but I will be selling the rear, suspension, interior, glass, etc. I also have stock motor parts, extra window glass, etc. that I can start selling now. I have to wait on the parts attached to the car until I get my new GSL-SE on the road (hopefully this weekend).

Parts not in car that can be sold now:
-Door glass $50 pr (have a few sets)
-Glass hatch for rear wiper car (wiper not included, pickup only) $75
-bare 12A intake $10
-carb (worked great when pulled) $20
-air filter assembly (holes plugged with silicone) $20
-rats nest (not sure about shape) $10
-new shutter valve still in box from Mazdatrix $50
-partial wiring harness for '83 (was cut at firewall so everything from firewall back) $30
-stereo panel (great shape) $50
-Grey 84-85 seats great shape $30

More to come

Parts in car:
-85 GSL Rear w/ new rotors, new calipers, new caliper brackets, new seals, hawk HPS pads (ss brake lines not included) all parts have about 10k on them $300
-3/4" lowering springs red (can't remember what brand) $75
-grey FC seats with only 1 small cut in drivers side seat $30 pr
-black door panels in great shape with matching rear panels, door handle covers, door pulls, etc (replaced door pulls and covers a few years ago) $80
-grey dash cover $10
-pocket under radio $5
-column cover set $20
More to come

I will also consider selling the complete car without motor and associated parts for $500

Just ask what you want pics of
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
Huzer
Posts: 4607
Joined: Wed Sep 19, 2007 9:14

Postby Huzer » Sat Oct 23, 2010 9:14

I'll take the car with everything, as is. You did say it's free, right?

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Sun Nov 14, 2010 9:14

Updated List:

1983 GSL part out plus extra; Tornado Silver (flat black) with black/maroon interior.

The motor, tranny, exhaust, stereo, fuel pump, shocks, and SS brake lines are not for sale. Most everything else is so I may have it even if it isn’t listed.

All prices do not include shipping and are negotiable. I can post more details and pictures if requested.

-85 GSL Rear w/ new rotors, new calipers, new caliper brackets, new seals, hawk HPS pads (SS brake lines not included) all parts have about 10k on them $300
-+ wheels with almost new Sumitomo HTR 200 (5k on them) - $230 (4) pickup only
-Center console painted black - $10
-Storage bins w/lids hinges broken black - $25 (2)
-Storage bin lids 84-85 grey - $10 (2)
-Hood - $20 pickup only
-Cowl cover 84-85 - $15
-Glove compartment with painted black lid - $10
-Cooling fan with clutch - $15
-Door glass - $50 pr (have a few sets)
-Glass hatch for rear wiper car (wiper not included, pickup only) - $75
-air filter assembly (holes plugged with silicone) - $20
-new shutter valve still in box from Mazdatrix - $50
-partial wiring harness for '83 (was cut at firewall so everything from firewall back) - $30
-81-83 stereo panel (great shape) - $50 (not one in car)
-Grey 84-85 seats great shape - $35 (2) Pickup only
-3/4" drop lowering springs red (can't remember what brand) - $75
-black door panels in great shape with matching rear panels, door handle covers, door pulls, etc (replaced door pulls and covers a few years ago) - $80
-79-83 grey dash cover - $10
-81-83 pocket under radio - $5
-81-83 column cover set - $20 (2 sets)
-81-83 GSL emblems – 15 pr (3 pr)
-84-85 GS change holder brown tabs broken (where power window switches would be on GSL) - $5
-black seat belts - $30 (2)
-black sun visors - $30 (2)
-maroon sun visors missing mounting tabs - $10 (2)
-black vinyl side headliner pieces - $25 (2)
-81-83 LCD clock working - $20
-81-83 headlight lift switch - $8
-81-83 rear defrost switch - $8
-81-83 power window switches, CC switch, rear wiper switch, and switch plate (light out in CC switch) - $40
-1983 130mph instrument panel (all working great) - $70
-84-85 12A computer - $30
-81-85 12A choke with good cable and knob - $40
-81-83 front hubs with rotors, calipers, pads, and caliper brackets (all working great but original except pads and barrings) - $150 (for both sides)
-81-85 amber side marker set - $20
-maroon parking brake cover - $5
-83 air control valve - $40
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
alex_n/a
Senior Member
Posts: 463
Joined: Fri Jul 09, 2010 9:14
Location: aurora

Postby alex_n/a » Sun Nov 14, 2010 9:14

hey i'm looking for a heater control valve for my fc, are you selling that and do you know if it will work from a first gen?

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Nov 15, 2010 9:14

alex_n/a wrote:hey i'm looking for a heater control valve for my fc, are you selling that and do you know if it will work from a first gen?

I don't think it will fit and I don't think I have a good one. There are 3 second gens in the pull & pay in the springs though.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Nov 29, 2010 9:14

Updated List:
I've removed some parts that are gone, added others, and clarified some.

All prices do not include shipping and are negotiable. I can post more details and pictures if requested.

-85 GSL Rear w/ new rotors, new calipers, new caliper brackets, new seals, hawk HPS pads (SS brake lines not included) all parts have about 10k on them $300
-+ wheels with almost new Sumitomo HTR 200 (5k on them) - $230 (4) pickup only
-Center console painted black - $10
-Storage bin lids 84-85 grey - $10 (2)
-Hood - $20 pickup only
-Cowl cover 84-85 - $15
-Glove compartment with painted black lid - $10
-Cooling fan with clutch - $15
-Door glass - $50 pr (have a few sets)
-Glass hatch for rear wiper car (wiper not included, pickup only) - $75
-air filter assembly (holes plugged with silicone) - $20
-new shutter valve still in box from Mazdatrix - $50
-partial wiring harness for '83 (was cut at firewall so everything from firewall back) - $30
-81-83 stereo panel (great shape) - $50 (not one in car)
-Grey 84-85 seats great shape - $35 (2) Pickup only
-3/4" drop lowering springs red (can't remember what brand) - $75
-79-83 grey dash cover - $10
-81-83 pocket under radio - $5
-81-83 column cover set - $20 (2 sets)
-81-83 GSL emblems – 15 pr (3 pr)
-84-85 GS change holder brown tabs broken (where power window switches would be on GSL) - $5
-maroon sun visors missing mounting tabs - $10 (2)
-81-83 LCD clock working - $20
-81-83 headlight lift switch - $8
-81-83 rear defrost switch - $8
-81-83 power window switches, CC switch, rear wiper switch, and switch plate (light out in CC switch) - $40
-1983 130mph instrument panel (all working great) - $70
-84-85 12A computer - $30
-81-85 12A choke with good cable and knob - $40
-81-83 front hubs with rotors, calipers, pads, and caliper brackets (all working great but original except pads and barrings) - $150 (for both sides)
-81-85 amber side marker set - $20
-maroon parking brake cover - $5
-83 air control valve - $40
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Mon Nov 29, 2010 9:14

yo dude, can you unload any of your parts on christi, or is it too soon.
"20<cut off="">"</cut>

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Mon Nov 29, 2010 9:14

6i_guy wrote:yo dude, can you unload any of your parts on christi, or is it too soon.

lol, except most everything won't fit.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
tsx_guy
Senior Member
Posts: 7438
Joined: Wed Sep 19, 2007 9:14
Contact:

Postby tsx_guy » Mon Nov 29, 2010 9:14

RX-7 Chris wrote:lol, except most everything won't fit.


retro fit dude... sigh... worst salesman ever!
"20<cut off="">"</cut>

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Wed Dec 01, 2010 9:14

Updated List:
I've removed some parts that are gone, added others, and clarified some.

All prices do not include shipping and are negotiable. I can post more details and pictures if requested.

-85 GSL Rear w/ new rotors, new calipers, new caliper brackets, new seals, hawk HPS pads (SS brake lines not included) all parts have about 10k on them $300
-+ wheels with almost new Sumitomo HTR 200 (5k on them) - $230 (4) pickup only
-Center console painted black - $10
-Storage bin lids 84-85 grey - $10 (2)
-Hood - $20 pickup only
-Cowl cover 84-85 - $15
-Glove compartment with painted black lid - $10
-Cooling fan with clutch - $15
-Door glass - $50 pr (have a few sets)
-air filter assembly (holes plugged with silicone) - $20
-new shutter valve still in box from Mazdatrix - $50
-partial wiring harness for '83 (was cut at firewall so everything from firewall back) - $30
-81-83 stereo panel (great shape) - $50 (not one in car)
-Grey 84-85 seats great shape - $35 (2) Pickup only
-3/4" drop lowering springs red (can't remember what brand) - $75
-79-83 grey dash cover - $10
-81-83 pocket under radio - $5
-81-83 column cover set - $20 (2 sets)
-81-83 GSL emblems – 15 pr (3 pr)
-84-85 GS change holder brown tabs broken (where power window switches would be on GSL) - $5
-maroon sun visors missing mounting tabs - $10 (2)
-81-83 LCD clock working - $20
-81-83 headlight lift switch - $8
-81-83 rear defrost switch - $8
-81-83 power window switches, CC switch, rear wiper switch, and switch plate (light out in CC switch) - $40
-1983 130mph instrument panel (all working great) - $70
-84-85 12A computer - $30
-81-85 12A choke with frayed cable and good knob - $40
-81-83 front hubs with rotors, calipers, pads, and caliper brackets (all working great but original except pads and barrings) - $150 (for both sides)
-81-85 amber side marker set - $20
-maroon parking brake cover - $5
-83 air control valve - $40
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Wed Dec 01, 2010 9:14

Image
Image

Image

Image

Image

Image

Image

Image
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
G-Man
Senior Member
Posts: 130
Joined: Mon Nov 15, 2010 9:14
Location: Boulder

Postby G-Man » Wed Dec 01, 2010 9:14

PM Sent, Chris.

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Wed Dec 01, 2010 9:14

-1983 130mph instrument panel (all working great) - $70 SOLD

-Grey 84-85 seats great shape - $35 (2) Pickup only PENDING
-3/4" drop lowering springs red (can't remember what brand) - $75 PENDING
-85 GSL Rear w/ new rotors, new calipers, new caliper brackets, new seals, hawk HPS pads (SS brake lines not included) all parts have about 10k on them $300 PENDING
-81-83 front hubs (for both sides) PENDING
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Sun Dec 05, 2010 9:14

The front springs:
Image
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Sun Dec 05, 2010 9:14

Shutter Valve is pending
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog


Return to “For Sale/Wanted”

Who is online

Users browsing this forum: Baidu [Spider] and 82 guests