FS: Mazdaspeed3 stuff in Aurora

Coulda · Postby **Coulda** » Wed May 25, 2011 9:14

I have a few parts for a 2007 Mazdaspeed3...I sold mine a few months ago everything works as it should and looks like new.

Stock - Front and Rear Sway bars (Make an offer) [color="Red"](sold)[/color]
Stock - Front and Rear springs ($50) great for a regular MZ3!!

Cobb Accessport v2 (with all required cables and attachments $400.00) called cobb today they said it will work with all MS3's and 2006-07 MS6's. [color="red"](sold)[/color]http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110603/b_153340.jpg

Aeroforce interceptor scan gauge - check/clear DTC's, anything the ECU controls this will read and display...can pick any 2 items to display (i always had AFR and Boost up). Includes a spare cover for just behind the wheel and a CF guage holder as depicted in the picture. (looking for $200 with everything) (will include an A pillar mount i just found...not a full a pillar replacement though) [color="Red"]SOLD![/color]
http://media9.dropshots.com/photos/145548/20110603/b_153144.jpg
http://media11.dropshots.com/photos/145548/20110603/b_153203.jpg
http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110603/b_153235.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110603/b_153251.jpg

Wheels...comes with extra valve stems and all lugs!! Doing $450 for the wheels with tires and TMPS!!
http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110604/b_143119.jpg
http://www.dropshots.com/zoom.html?large=http://media10.dropshots.com/photos/145548/20110604/b_143125.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110604/b_143129.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110604/b_143138.jpg
http://www.dropshots.com/zoom.html?large=http://media11.dropshots.com/photos/145548/20110604/b_143144.jpg
http://www.dropshots.com/zoom.html?large=http://media9.dropshots.com/photos/145548/20110604/b_143232.jpg

As the last picture shows...there is more tread than i thought there was.

Also found a parcel tray for the back of a Mazdaspeed3

I would rather everything be local pick up...I am even willing to meet you some where. Thanks for looking at this add.

Coulda · Postby **Coulda** » Thu Jun 02, 2011 9:14

I have all this and 4x wheels off a Mazdaspeed3...the tires are no good but the TMPS is still working great and the wheels only have 20k or so miles on them so theres very little in the way of damage. Ill clean them up this weekend and post pictures. I think $600 is pretty fair for the wheels but I think I am open to offers.

Colombia28 · Postby **Colombia28** » Thu Jun 02, 2011 9:14

How much for the four wheels?

Stealth01 · Postby **Stealth01** » Thu Jun 02, 2011 9:14

If I had $400, I'd take the AP, but I only have $150 in the mod fund.

Coulda · Postby **Coulda** » Thu Jun 02, 2011 9:14

Sent a PM to colombia

erod550 · Postby **erod550** » Thu Jun 02, 2011 9:14

Great price on the AP. GLWS.

Coulda · Postby **Coulda** » Fri Jun 03, 2011 9:14

some pictures added...ill have more soon.

Coulda · Postby **Coulda** » Sat Jun 04, 2011 9:14

More pictures and information...have had interest but no one pulling the trigger. If you dont think a price is fair or you can find a better price...send me a link and we can talk about it.

tnerb · Postby **tnerb** » Sat Jun 04, 2011 9:14

Would installing the scan gauge be difficult or do you just need to plug it in somewhere (OBD-II port?) and mount it in the car?

Coulda · Postby **Coulda** » Sat Jun 04, 2011 9:14

It reads all the information it can display from the OBDII port. Plug and play.

Coulda · Postby **Coulda** » Sat Jun 04, 2011 9:14

You guys got first dibs and no one bit...tomorrow i start advertising everywhere else at slightly higher prices...

Coulda · Postby **Coulda** » Thu Jun 09, 2011 9:14

Price drop...
Ill do $150 for the Gauge and pods

$450 for all 4 wheels and tires that have working TMPS inside!! (local pick up or will meet you somewhere!)

Colombia28 · Postby **Colombia28** » Sat Jul 09, 2011 9:14

Coulda wrote:Price drop...
Ill do $150 for the Gauge and pods

$450 for all 4 wheels and tires that have working TMPS inside!! (local pick up or will meet you somewhere!)

Do you still have these? Sorry for never getting back to you.

Coulda · Postby **Coulda** » Tue Jul 12, 2011 9:14

I do still have the wheels...the gauge and gauge pod are gone though.

Colombia28 · Postby **Colombia28** » Tue Jul 12, 2011 9:14

I'll take the wheels and tires.

FS: Mazdaspeed3 stuff in Aurora

FS: Mazdaspeed3 stuff in Aurora

Who is online