shouldn't my car be lower?

Talk about your Rotaries!
User avatar
alex_n/a
Senior Member
Posts: 463
Joined: Fri Jul 09, 2010 9:14
Location: aurora

shouldn't my car be lower?

Postby alex_n/a » Tue Jul 26, 2011 9:14

I have always noticed that my car sits at an angle. lower on the front than the rear. when I bought the car I noticed the rear struts were lose and the bolts were barely on the studs. I did tighten them down but it sits pretty high. pretty much at stock height. should I get them re installed maybe they weren't compressed? not much experience with suspension mechanics so i just need some opinions. I'll get better pictures tomorrow if needed but here is a few.

Image

rear:
Image

front:
Image

with current wheels/tires
Image

the rear is about 2" higher than the back
Image
89' rx7/ brought back to life/ now sold
96' Honda Civic cx hatchback midori green / stock / daily driver / 39mpg
00' Ford explorer xlt / winter work horse / 218k miles and running like a champ

User avatar
iani1.1
Posts: 1942
Joined: Sun Oct 19, 2008 9:14
Location: ATX
Contact:

Postby iani1.1 » Tue Jul 26, 2011 9:14

not really, lowering springs dont really guarantee a drop unless you change out the strut. i mean, when you get after market struts the spring seat is usually lower than stock thus making actually seeing the difference.

if you do wanna go lower, id get coilovers or aftermarkets shock/struts with the ground control coils and camber plates

kyb gr2 with gf210 springs
Image

coilovers
[sig below]
Image

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Wed Jul 27, 2011 9:14

When I put springs on my car they said 3/4" lowering and they rased the car almost an 1".
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
erod550
Posts: 3764
Joined: Wed Sep 23, 2009 9:14
Location: Colorado Springs

Postby erod550 » Wed Jul 27, 2011 9:14

It's also not uncommon for cars to just be higher in the rear than the front. So even though it might be lowered from stock, it could still be higher than the front. Like my Mustang. Stock springs/dampers, yet the rear sits higher than the front. In my case though, all the lowering springs advertise a bigger drop in the rear than in the front to level it out.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors

Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4

User avatar
alex_n/a
Senior Member
Posts: 463
Joined: Fri Jul 09, 2010 9:14
Location: aurora

Postby alex_n/a » Wed Jul 27, 2011 9:14

iani1.1 wrote:not really, lowering springs dont really guarantee a drop unless you change out the strut. i mean, when you get after market struts the spring seat is usually lower than stock thus making actually seeing the difference.

if you do wanna go lower, id get coilovers or aftermarkets shock/struts with the ground control coils and camber plates

kyb gr2 with gf210 springs
[IMG http://i889.photobucket.com/albums/ac97 ... 132833.jpg[/IMG

coilovers
[sig below]


I just want the rear to go lower and level out. it does have the gas adjust shocks but maybe the front is starting to sag.

RX-7 Chris wrote:When I put springs on my car they said 3/4" lowering and they rased the car almost an 1".


maybe your old springs were sagging already lol

erod550 wrote:It's also not uncommon for cars to just be higher in the rear than the front. So even though it might be lowered from stock, it could still be higher than the front. Like my Mustang. Stock springs/dampers, yet the rear sits higher than the front. In my case though, all the lowering springs advertise a bigger drop in the rear than in the front to level it out.


It doesn't look bad on muscle cars. but my 1.3 liters don't really scream "muscle" lol
Image

89' rx7/ brought back to life/ now sold

96' Honda Civic cx hatchback midori green / stock / daily driver / 39mpg

00' Ford explorer xlt / winter work horse / 218k miles and running like a champ

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Thu Jul 28, 2011 9:14

My springs were very sagged. The main reason for me to put the new springs on was to stiffen things up.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog


Return to “Rotary Vehicle”

Who is online

Users browsing this forum: No registered users and 67 guests