Bad bad news! Mazda may halt rotary development!!

Talk about your Rotaries!
User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Bad bad news! Mazda may halt rotary development!!

Postby VRx8 » Mon Aug 08, 2011 9:14

Mazda Halts Rotary Engine Development: Is 2011 Your Last Chance To Wankel?
By Edward Niedermeyer on August 8, 2011

Though the next-generation of Mazda’s rotary engine has been in development since 2007, and has been the subject of several TTAC Wild-### Rumors, WardsAuto reports that the unique engine design could well be reaching the end of its life.

Kiyoshi Fujiwara, Mazda executive officer-product planning and powertrain development, says there is “huge discussion” within the Hiroshima, Japan-based company whether to continue on with a rotary engine.

Fujiwara says economic hardship has some top brass looking for programs to cut, and that the engine program is on the list.

Continuing development of the rotary has been halted for now, but he hopes it will resume in the future, noting the technology is a part of Mazda’s DNA.

Without identifying what exactly they are, Fujiwara says three major problems were identified with the current generation of rotary engine, but that two of the three have been overcome. Still, Mazda says that only one thing will save the rotary engine at this point: success with Mazda’s new suite of SKYACTIV technologies. If these fuel-saving measures spark new interest in the Mazda brand, says Fujiwara, then Mazda might have enough cash to invest in its rotary engine. Alternatively, a Mazda-developed Wankel engine could be used as an electric range-extender. In any case, don’t expect a new Mazda rotary before 2017… if ever. Here’s hoping Mazda is able to keep this unique, distinctive drivetrain alive for future generations of enthusiast drivers.

Mod Edit: Added original source link. http://www.thetruthaboutcars.com/2011/08/mazda-halts-rotary-engine-development-is-2011-your-last-chance-to-wankel/

User avatar
erod550
Posts: 3764
Joined: Wed Sep 23, 2009 9:14
Location: Colorado Springs

Postby erod550 » Tue Aug 09, 2011 9:14

I'm guessing stricter emissions standards is the one major problem that's holding them back.
2015 Ironman Silver Veloster Turbo - Bone stock and staying that way
1990 Crystal White Miata - Beater - Bignose 1.6L Swap, Robbins Top w/Glass Window, E-Codes, Air Horns, Brembo Rotors

Former Rides:
2011 Kona Blue Mustang GT 5.0
2009 True Red Mazdaspeed3 GT
2005 Flame Red SRT-4

User avatar
RX-7 Chris
Posts: 7800
Joined: Tue Oct 02, 2007 9:14
Location: Colorado Springs
Contact:

Postby RX-7 Chris » Tue Aug 09, 2011 9:14

doesn't really surprise me all that much.
1984 RX-7 GSL-SE [size=84]My restomod project[/SIZE]


1964 Ford Galaxie 500XL flat black w/ white interior, 2 dr fastback, 390 thunderbird, C6 auto, 2500 rpm high stall converter, shift kit, AC, Holley 750 cfm

[size=100]RIP 1983 RX-7[/SIZE]

My Car Blog

User avatar
chickenwafer
Posts: 2515
Joined: Wed Mar 11, 2009 9:14
Location: Greeley

Postby chickenwafer » Tue Aug 09, 2011 9:14

Yeah, I'm not terribly surprised, either.

The 16X has a lot of design challenges, the paramount of which (and most likely the 3 design hurdles they eluded to in the article) are emissions, power production, and fuel efficiency.

Rotaries can make great power, but usually they need to be turbocharged to do so, which hurts emissions, fuel economy, and reliability. Naturally aspirated rotaries tend to run forever with proper care, however they are usually struggling for power.

The main problem is, with the 16X, Mazda would need to get over 300bhp out of it without turbocharging. I don't see this feasibly happening- it's not like they are going to release a p-ported rotary for the street! To retain Renesis-style side intake and exhaust porting, plus make 300bhp NA and pass emissions...not realistically going to happen. And who want's an expensive sports car making less than 250bhp these days anyways when the Nissan 370Z is making well over 300bhp.

The rotary is, and always will be, an uphill battle, but like the article said, it is part of Mazda's DNA. Hell, that's how the RX-8 started, with Mazda engineers working after-hours developing the Renesis on their own time.
:eek:

User avatar
speedjunkie
Senior Member
Posts: 5372
Joined: Wed Jan 02, 2008 9:14
Location: Colorado Springs
Contact:

Postby speedjunkie » Tue Aug 09, 2011 9:14

I wish I could be a Mazda engineer to try to keep this thing alive. This sucks.
Image

User avatar
VRx8
Senior Member
Posts: 755
Joined: Sat Jul 04, 2009 9:14
Location: San Antonio, TX

Postby VRx8 » Tue Aug 09, 2011 9:14

I hope they keep making housings, rotors etc..


Return to “Rotary Vehicle”

Who is online

Users browsing this forum: No registered users and 67 guests